Teak Shower Caddy – A shower tray is in the space under a standing shower. It is when the shower does not include a bathtub. Instead of a bathtub with surrounding walls, the design of shower trays includes a wraparound shower. That is often made up of individual panels that form the walls. When installing a new shower tray in your home, one of the most important parts of the process is the installation of the shower tray, as it helps protect your floor from water damage.
Put the shower in its place in the basement where it will be installed. Undermine the part of the floor you are receiving in the path of installing shower trays, using a hammer and a chisel. Remove the shower filter. Place the strainer in the hole in the shower tray so that the side of the screen is seen from above. Adjust the shower tray on the subfloor. Check to make sure it is level in every way.
12 Picture Gallery: Installation for Teak Shower Caddy
pilot holes through the part of the shower pan lips that come into contact with the wall studs. If you are working with a finished wall, find the studs with a beam detector. Place the rust-resistant screws in the pilot holes to secure the shower tray against the walls. And then, place a black compression gasket over the top of the drain pipe that comes through the shower filter. Place a block of wood on top of the drain pipe and tap with a hammer until it is pushed into the ground.
This post topic: Lighting Ideas